Forum.HaveTheKnowHow.com

Posted: **May 28th, 2014, 2:27 pm**

Hello,

Today I discovered this website and I am very impressed, there is lots for me to learn here. Thank you for that! :-). I am following the guide to install LTSP, which is quite clear but I get stuck anyways.

Like in the guide I have a separate DHCP server and I don't really understand which file to edit. I have edited the /etc/ltsp/dhcpd.conf file on the LTSP server and changed everything that was red in the guide. Should I then not change the config file on the DHCP server as well?

All the best,
Arnoud Roeland

Posted: **June 1st, 2014, 7:33 pm**

Hi,

Also enjoy the howto.
/etc/ltsp/dhcpd.conf is according to the header text in /etc/dhcp/dhcpd.conf prevelent.

Code: Select all

#
# Sample configuration file for ISC dhcpd for Debian
#
# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as
# configuration file instead of this file.
#
#

But setting the subnet and range in /etc/dhcp/dhcpd.conf

Code: Select all

subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.200 192.168.1.250;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}

brings me futher...the ltsp server is now functioning as DHCP server.
Now I'm heading in the right direction because my client gets the login screen. Sadly I am stuck at this point. Client say's verifying password and then jumps back to the login screen again...

??

BTW working on trusty (14.04) server. XBMC frontend

GRTZ Frank

Forum.HaveTheKnowHow.com

Installing LTSP

Installing LTSP

Re: Installing LTSP